Similar Posts

  • HIGH POWER AUDIO

    High power amplifiers present additional problems to the product designers. Thermal Management, circuit protections, signal integrity and safety concerns are all much more difficult. We have designed amplifiers capable of supplying 2400 watts of power into 1 ohm to drive the most difficult speakers with low distortion.

  • ANALOG AUDIO

    AeVee Labs has extensive expertise in all aspects of analog audio including D/A conversion, A/D conversion, line-level and power amplification. We understand what it takes to deliver products with the highest quality possible within any budget.

  • LINUX

    We have built and integrated linux kernels running on custom board (multicore imx6) and off the shelf boards (beaglebone). Yocto and other build methodologies, custom drivers for specialty audio and our own custom hardware interfaces. We can untangle the options and get a lean build with U-Boot modifications for instant on applications.

  • RFI/EMC

    Today’s high speed electronics can cause severe problems with radiated and conducted emissions. Agency (FCC, CE, etc.) requirements keep getting more strict. System and board design must be done with this in mind to ensure that product introductions are not delayed as the result of inadequate upfront preparation. We can help during the initial development…

  • DIGITAL AUDIO

    The staff at AeVee has experience back to the dawn of the CD era. We have used digital signal processors for audio coding from Dolby to G.728, audio processing from bass management to equalization. We understand how to get the most out of available dynamic range through bit management and dithering. We know the effects…

  • User Interface

    Operation of a product should be obvious whenever possible and logical enough to be memorable after one use. A good user-interface, programmed well, allows your customer to get the most our of your product. A badly conceive U/I makes it something your customer dreads having to use. At AeVee Labs we have experience making the…