RFI/EMC

Byitgav

Today’s high speed electronics can cause severe problems with radiated and conducted emissions. Agency (FCC, CE, etc.) requirements keep getting more strict. System and board design must be done with this in mind to ensure that product introductions are not delayed as the result of inadequate upfront preparation. We can help during the initial development phase to understand current flows and radiation patterns to ensure that products are in compliance from the start. If you are having problems with an existing design we can help you understand how to identify and reduce the sources of your emissions as well as how to best contain them through proper grounding and shielding.

Similar Posts

  • Embedded Software

    Byitgav

    High quality software is the key to making any system run reliably and smoothly. It must be designed to be testable and maintainable to allow for added functionality throughout a product’s life. It should be portable and modular so that a change of hardware can be handled easily and so that a successful design can…

  • MOTOR CONTROL

    Byitgav

    We have helped our customers with precision driving of BLDC motors, both with custom drive algorithms and Power FET bridge design. This includes 100 Watt motors for battery powered medical device and industrial machines at 1000 Watts.

  • LINUX

    Byitgav

    We have built and integrated linux kernels running on custom board (multicore imx6) and off the shelf boards (beaglebone). Yocto and other build methodologies, custom drivers for specialty audio and our own custom hardware interfaces. We can untangle the options and get a lean build with U-Boot modifications for instant on applications.

  • Wireless

    Byitgav

    There are many options for wireless communications: Wifi, Bluetooth, IR, Zigbee and more. We can help you choose the one that best fits the needs of your application, be it high transmission speed, low cost, or quickest time to market. We have worked with Wifi and Bluetooth interfaces with simple embedded micros (IOT) and embedded…

  • User Interface

    Byitgav

    Operation of a product should be obvious whenever possible and logical enough to be memorable after one use. A good user-interface, programmed well, allows your customer to get the most our of your product. A badly conceive U/I makes it something your customer dreads having to use. At AeVee Labs we have experience making the…

  • DIGITAL SIGNAL PROCESSING

    Byitgav

    DSPs are the backbone of digital audio, communications and motor control. We have used fixed and floating point DSPs from Analog Devices, TI, Motorola and FPGAs from Xilinx to solve problems in consumer electronics, telecommunications, and industrial applications. We understand how to apply the right amount of math for the project and how to get…